The Chipquik Conductive Paint 15cc Syringe provides low resistance, metal-based conductive paint in 10g syringe with a plunger & two tips. It can be applied by dispensing, paintbrush, or stencil and squeegee.
This silver/tin/copper-based conductive paint is usually used to repair flex circuits or maybe fill in gaps in EMF shielding. But you can use it on paper, plastic, fabric, etc. to create a low-resistance conductive connection.
Allow 60-120 minutes for the paint to dry before using the circuit. Resistance will drop from a few Mega Ohms at 0 minutes to approximately 3 ohms per inch of the trace after 120 minutes.
Packaging: 15cc/10g Syringe
Cleaning: Clean using water or isopropyl alcohol (IPA).