Home/Educational & Hobby Kits/Development Boards/Arduino/Arduino Modules/CNC SHIELD V3 A4988 MOTOR DRIVER MODULE EXPANSION BOARD

CNC SHIELD V3 A4988 MOTOR DRIVER MODULE EXPANSION BOARD

$9.95

10 in stock

CNC Shield V3.0 can be used as a driver expansion board for engraving machines, 3D printers, and other devices. There’re 4 slots in the board for stepper motor drive modules, can drive 4 stepper motors, and each step stepper motor only need two IO port, that is to say, 6 IO ports can quite well to manage three stepper motor, it’s very convenient to use. After inserting Arduino CNC Shield V3.0 into Arduino UNO, and installed GRBL firmware then you can quickly DIY a CNC engraving machine.

10 in stock

TOTAL BULK PRICE

x
SKU: V3-4988 Category:

Description

CNC Expansion Board:
• Version: V3.0
• Color: Red
• Size: 20 x 15mm / 0.78 x 0.59″
• Thermal Shutdown Circuit: Yes
• Cross Current Protection: Yes
• Ground Fault Protection: Yes
• Short Circuit Protection: Yes
• Compatible Logic Voltage: 3.3V and 5V
• Five-Step Modes: Full, 1/2, 1/4, 1/8 and 1/16
• Internal UVLO and low RDS (on) output.
• Automatic current attenuation mode Detection/Select.
• Phase-in rectifier, low power consumption.
• Voltage: DC 12V to 36V (only DRV8825 driver can handle up to 36V, so please consider voltage for power supply)

* Warning: Connecting or disconnecting stepping motor while driver is powered on might damage driver.


Title

Go to Top