PolyMide™ CoPA is based on a copolymer of Nylon 6 and Nylon 6,6. The filament combines excellent strength, toughness, and heat resistance of up to 180˚C.
Description
Does PolyMide™ CoPA require an enclosed printer?
No, all our Nylon features our Warp-Free™ Technology which means it does not require a heated bed or heated chamber of more than 50˚C.
PolyMide™ CoPA can be printed on a 30-40˚C bed without enclosure.
Printing, Drying, and Annealing Settings
Printing Temperature: 250˚C – 270˚C
Bed Temperature: 25˚C – 50˚C
Printing Speed: 30mm/s – 50mm/s
Fan: OFF
Direct Drive:
Retraction Distance: 3mm
Retraction Speed: 50mm/s
Indirect Drive:
Retraction Distance: 6mm
Retraction Speed: 60mm/s
Drying Settings: 100˚C for 6h
(Only if the material has absorbed moisture)
Annealing Settings: 80˚ for 6h
Manufacturer: Polymaker
Filament Diameter: 0.070″ (1.75mm)
Weight: 1.653 lb (0.75 kg)