PolyFlex™ TPU95 is a thermoplastic polyurethane (TPU) based filament specifically engineered to work on most desktop 3D printers. It has a shore hardness of 95A and can stretch more than 3 times its original length.
Description
We highly recommend using a direct drive printer to print PolyFlex™ TPU95. A direct drive printer is a printer with an extruder mounted on top of the hot end.
95 refers to the shore hardness of the material: 95 Shore A.
In 3D printing, the shore hardness is only an indication of how flexible the printed part will be. However, it is important to also take into consideration the infill percentage, number of walls, top/bottom layers, and the layer height.
Printing Temperature: 210˚C – 230˚C
Bed Temperature: 25˚C – 60˚C
Printing Speed: 20mm/s – 40mm/s
Fan: ON
Direct Drive:
Retraction Distance: 3mm
Retraction Speed: 40mm/s
Indirect Drive:
Retraction Distance: 6mm
Retraction Speed: 60mm/s
Drying Settings: 65˚C for 8h
(Only if the material has absorbed moisture)
Manufacturer: Polymaker
Filament Diameter: 0.070″ (1.75mm)
Weight: 1.653 lb (0.75 kg)
